Page Comparison

Requirements

• UNC path is accessible on the machine that the FileShare application is installed on

• A blank SQL database for the FileShare schema to be installed on.

• An Active Directory connection

...

CON, PRN, AUX, NUL 
  COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9
  LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9

Workflow Steps

• Get the UNC path.

• Install the Agent service for Fileshare.

• Configure the FileShare application to connect to the UNC path and sync.

  • Open the Database Tab first

  • Then the CAM Login tab

  • Then the Active Directory tab

  • Then the FileShare tab

• Create Folders through Folder Template Editor or through the FileShare.

• Create Workspaces using the Workspace Wizard.

...

• Download the installer fromAdministration->Downloads-> Fileshare within CAM.

• There the Exe and MSI downloads are available. Exe should be used for first-time installations.

• Run the installer on the machine with access to the fileshare.

• The installer will install the FileShare Application and the CAM FS windows Windows service.

• The program is installed in the x86 program files folder by default.

...

• Start the Application CAM.FileShare.UI.exe from the Prosperoware\CAM\Fileshare\Agent\ folder. It is not necessary to run as an administrator.

• On the run, the user interface will show 7 tabs: FileShares, CAM Login, Database, Active Directory, Agent, Command, and Log.

Database tab

On the first run, this tab should be opened first. This tab sets the database connection string.

The following information displays is displayed on the tab:

Click Test to test the authentication to the SQL Database.

...

The following information displays is displayed on the tab:

The database schema and stored procedures will then create be created automatically into the database you selected.

...

Active Directory should be setup set up next so that users and groups can be synched. The domain is needed for the fileshare tab. At least one active directory is required.

...

The following information displays is displayed on the tab:

...

Actions include:

Active Directory data is locally cached to improve querying and processing. This cached data is stored in the following two tables:

...

Then it is time to add the fileshares by going to the FileShares tab. This tab displays any file shares configured in the application. Multiple fileshares file shares can be setupset up.

The following information displays is displayed on the tab:

To add a New File Share

• Click the Add button from the File Shares tab.

• Enter the UNC folder path of the File Share in Folder Path. Format: \\ComputerName\Folder. Is required.

• Choose an Active Directory Domain in the Default Domain lookup. Is required.

• Choose a Default OU for users and groups if necessary. Format is OU=Department

• Select the organization format of the File Share.

  • First-level folders are matters (workspaces or projects)

  • Second-level folders are matters (workspaces or projects)

  • Custom: Allows a custom level of folders to determine the root matter/workspace/project. Select from the selection button.

• Enable Metadata Filter. Select to filter the Metadata of the FileShare. Client and Matter expressions can be set. The Format would be, for example, by default:

  • Client Number Regular Expression: ^\s*([a-zA-Z0-9]+)[^--]+ and

  • Matter Number Regular Expression: (?<=-)[^-]+(\s*). These expressions will filter matter and client when the client/matter number is set up as 1000-001 for example.

• When the file share sync is ready to begin, select the Automatic Sync Enabled button to Yes.

• Enter the timeframe for the sync. For example, Sync every 30 minutes. Default The default is 10 minutes.

• Select whether or not to sync documents.

• Select whether or not to perform personal data detection. Personal data could be any sensitive information for example social security numbers, and the personal data would be scrubbed.

• Select whether to sync the Audit. This is important as because if the Event Log or Audit is truncated or removed prematurely, delta syncs may not capture the last sync information.

• A nickname for the sync can be given.

...

The following actions can be taken on fileshares file shares from the File Share tab:

• Edit: Edit the file share configuration.

• Delete: Delete the Configuration.

• Create Folder: Allows to create a folder within the fileshare from the application.

• Sync Now: Runs the File Share sync immediately. Good for one-time sync.

• Re-Scan Now: Allows Fileshare to rescan the UNC path for folder and document count statistics.

• Personal Data Detection: Allows the user to detect and manage personal sensitive data found in the file share.

• Import Metadata: Allows the import of metadata to the fileshare using CSV. Read CSV parameters for all metadata

• Download Metadata CSV: Downloads the metadata in CSV form from the fileshare. Allows an easy export of all metadata, to be used in CAM.

...

This tab displays all the jobs running of on File Share syncs.

The following information displays is displayed on the tab:

...

Commands can be filtered by using the filter option. KPI’s KPIs that can be filtered are: The Fileshare path, Command, Status, Created, and Updated.

Log

This tab displays all the Sync logs.

The following information displays is displayed on the tab:

Users can export the log to Excel. Users can first sort and filter the log results to what they need exported and then click the export button.

...

This tab displays all the agents setup set to sync fileshares. Multiple agents can be used to scale up batch processing or to divide the workloads.

The following information displays is displayed on the tab:

Actions include:

Configuration files

The Connection Strings will be saved to the Prosperoware\CAM\Fileshare\Agent\Config folder. The following connection strings are important:

AppSettings.config: Contains application global settings.

...

Contains the CAM Login and Database information.

Self-Healing:

Fileshare now checks if any security changes to the share violate controls and overwrites overwrite them accordingly.

This is called self-healing in CAM.

...

Process:

1. if someone removes (excludeexcludes) or adds/edits (includeincludes) a user/group or access in the Folder Security that violates the policy setup in the Control Center.

2. That is then synced using the linkfileshare job by the Fileshare app.

3. After the job completesis completed, it gets pushed to the control center to then re-apply the security control.

...

• CSVs waiting to be uploaded are stored in : c:/temp/CAMCSVFolder

• Successfully uploaded CSV’s reside in : c:/temp/CAMFSArchivedCSVUploader

• Backups of csvs that had been processed for upload to CAM are also in C:\ProgramFiles (x86)\Fileshare\bin\Debug\archivecsv.